SCI投稿Title Page、Cover letter、Highlights、Manuscript模板_title page模板-程序员宅基地

技术标签: 建筑环境与能源相关论文  SCI  

参考:
SCI投稿Cover letter模板
SCI 投稿全过程信件模板一览(Cover letter,催稿信等)
SCI 投稿 3 个月迟迟无消息,竟只是漏了这个步骤…
elsevier初次投稿模板
最新投稿信 Cover Letter 和Highlights 模板资料
在这里插入图片描述

1.第一次投稿Cover letter:主要任务是介绍文章主要创新以及声明没有一稿多投

Dear Editors:
We would like to submit the enclosed manuscript entitled “PaperTitle”, which we wish to be considered for publication in “JournalName”. No conflict of interest exits in the submission of thismanuscript, and manuscript is approved by all authors forpublication. I would like to declare on behalf of my co-authorsthat the work described was original research that has not beenpublished previously, and not under consideration for publicationelsewhere, in whole or in part. All the authors listed haveapproved the manuscript that is enclosed.
In this work, we evaluated …… (简要介绍一下论文的创新性). I hope this paper issuitable for “Journal Name”.
The following is a list of possible reviewers for yourconsideration:

  1. Name A
    E-mail:××××@××××
  2. Name B E-mail:××××@××××
    We deeply appreciate your consideration of our manuscript, and welook forward to receiving comments from the reviewers. If you haveany queries, please don’t hesitate to contact me at the addressbelow.
    Thank you and best regards.
    Yours sincerely,
    ××××××
    Corresponding author:
    Name: ×××
    E-mail: ××××@××××

【Cover letter的署名】:一般是通讯作者,由通信作者与期刊联系。

Declaration of interest

sci投稿Declaration of interest怎么写?
Declaration of interests
☒ The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
☐ The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:

如果无,就写第一个;有的话,写第二个,并说明原因

二、催稿信:询问稿件处理到声明步骤

“WithEditor”

Dear Prof. ×××:
Sorry for disturbing you. I am not sure if it is the right time tocontact you to inquire about the status of my submitted manuscripttitled “Paper Title”. (ID: 文章稿号), although the status of “WithEditor” has been lasting for more than two months, since submittedto journal three months ago. I am just wondering that my manuscripthas been sent to reviewers or not?
I would be greatly appreciated if you could spend some of your timecheck the status for us. I am very pleased to hear from you on thereviewer’s comments.
Thank you very much for your consideration.
Best regards!
Yours sincerely,
××××××
Corresponding author:
Name: ×××
E-mail: ××××@××××

Under Review

Dear XXXX,

I am pleased to contact you asking about the status of the manuscript submitted in XXXX(manuscript No. XXXXXXX).

When I recently logged onto the submission center I found the manuscript was still under review. It is understandable that the editors have a large number of manuscripts to review, however I wish to ensure that there have been no technical difficulties with the submission, as the delay seems quite long.

We would be very happy to learn whether the editors and reviewers are interested in our work. If possible, can you please estimate when the review process may be finished? We patiently wait for your further reply.

Thank you for your time and consideration,

Sincerely,
XXXX

三、修改稿Cover letter

Dear Dr/Prof…(写上负责你文章编辑的姓名,显得尊重,因为第一次的投稿不知道具体负责的编辑,只能用通用的Editors):
On behalf of my co-authors, we thank you very much for giving us anopportunity to revise our manuscript, we appreciate editor andreviewers very much for their positive and constructive commentsand suggestions on our manuscript entitled “Paper Title”. (ID:文章稿号).
We have studied reviewer’s comments carefully and have maderevision which marked in red in the paper. We have tried our bestto revise our manuscript according to the comments. Attached pleasefind the revised version, which we would like to submit for yourkind consideration.
We would like to express our great appreciation to you andreviewers for comments on our paper. Looking forward to hearingfrom you.
Thank you and best regards.
Yours sincerely,
××××××
Corresponding author:
Name: ×××
E-mail: ××××@××××

四、修改稿回答审稿人的意见(最重要的部分)

List of Responses
Dear Editors and Reviewers:
Thank you for your letter and for the reviewers’ commentsconcerning our manuscript entitled “Paper Title” (ID: 文章稿号). Thosecomments are all valuable and very helpful for revising andimproving our paper, as well as the important guiding significanceto our researches. We have studied comments carefully and have madecorrection which we hope meet with approval. Revised portion aremarked in red in the paper. The main corrections in the paper andthe responds to the reviewer’s comments are as flowing:
Responds to the reviewer’s comments:
Reviewer #1:

  1. Response to comment: (……简要列出意见……)
    Response: ××××××
  2. Response to comment: (……简要列出意见……)
    Response: ××××××
    。。。。。。
    逐条意见回答,切忌一定不能有遗漏
    针对不同的问题有下列几个礼貌术语可适当用用:
    We are very sorry for our negligence of ………
    We are very sorry for our incorrect writing ………
    It is really true as Reviewer suggested that……
    We have made correction according to the Reviewer’s comments.
    We have re-written this part according to the Reviewer’ssuggestion
    As Reviewer suggested that……
    Considering the Reviewer’s suggestion, we have ……
    最后特意感谢一下这个审稿人的意见:
    Special thanks to you for your good comments.
    Reviewer #2:
    同上述
    Reviewer #3:
    ××××××
    Other changes:
  3. Line 60-61, the statements of “……” were corrected as“…………”
  4. Line 107, “……” was added
  5. Line 129, “……” was deleted
    ××××××
    We tried ourbest to improve the manuscript and made some changes in themanuscript. These changes will not influence thecontent and framework of the paper. And here we did not list thechanges but marked in red in revised paper.
    We appreciate for Editors/Reviewers’ warm work earnestly, and hopethat the correction will meet with approval.
    Once again, thank you very much for your comments andsuggestions.

五、文章接受后可以考虑感谢一下负责你文章的编辑或主编(根据需要)

Dear Prof. ××××××:
Thanks very much for your kind work and consideration onpublication of our paper. On behalf of my co-authors, we would liketo express our great appreciation to editor and reviewers.
Thank you and best regards.
Yours sincerely,
××××××
Corresponding author:
Name: ×××
E-mail: ××××@××××

六、询问校稿信件(如果文章接受后时间较长)

Dear ×××:
Sorry for disturbing you. I am not sure if it is the right time to contact you to inquire about the status of our accepted manuscripttitled “Paper Title” (ID: 文章稿号), since the copyright agreement for publication has been sent to you two months ago. I am just wondering that how long I can receive the proof of our manuscriptfrom you?
I would be greatly appreciated if you could spend some of your time for a reply. I am very pleased to hear from you.
Thank you very much for your consideration.
Yours sincerely,
××××××
Corresponding author:
Name: ×××
E-mail: ××××@××××

七、文章校稿信件

Dear Mr. ×××:
Thanks very much for your kind letter about the proof of our papertitled “Paper Title” (ID: 文章稿号) for publication in “Journal Name”.We have finished the proof reading and checking carefully, and somecorrections about the proof and the answers to the queries areprovided below.
Corrections:

  1. In ****** should be **** (Page , Right column, line)
  2. In **** the “*****” should be “****” (Page , Right column,line)
    Answers for “author queries”:
  3. *********************.


We greatly appreciate the efficient, professional and rapidprocessing of our paper by your team. If there is anything else weshould do, please do not hesitate to let us know.
Thank you and best regards.
Yours sincerely,
××××××
Corresponding author:
Name: ×××
E-mail: ××××@××××

版权声明:本文为博主原创文章,遵循 CC 4.0 BY-SA 版权协议,转载请附上原文出处链接和本声明。
本文链接:https://blog.csdn.net/weixin_48615832/article/details/120317336

智能推荐

git编译报错解决-程序员宅基地

文章浏览阅读939次。git configure 配置时没有设定--with-curl --with-expat 造成首先确定是否安装curl包:rpm-qa|grepcurl如果没有安装,一定要安装:yuminstall-ycurlcurl-devel安装完成后,删除原安装目录和编译目录,重新解压缩:tar-zxfgit-2.9.2.tar.gz-C/tmp/cd/..._--with-curl失败

Johnson算法:多源最短路算法-程序员宅基地

文章浏览阅读304次。Johnson算法请不要轻易点击标题一个可以在有负边的图上使用的多源最短路算法时间复杂度\(O(n \cdot m \cdot log \ m+n \cdot m)\)空间复杂度\(O(n+m)\)这个神奇的算法综合利用了Dijkstra算法和Bellman-Ford算法(不要慌,虽然有负边但Dijkstra可以跑!)在开始讲解之前,我们将其与floyd进行比较\(flo..._多源最短路的最优复杂度

JTopo + Vue 实现自定义拖拽流程图_vue拖拽流程图-程序员宅基地

文章浏览阅读8.2k次,点赞32次,收藏42次。JTopo + Vue 实现自定义拖拽流程图 市场上做流程图的插件比较多,这里介绍一种基于canvas编写的js插件,结合vue框架做出精美的流程图 首先搭建vue框架,这里就不做介绍,由于jtopo官方demo里用到了jquery,所以我的项目里也引用了jquery插件,鉴于这里用到了很多的dom操作,所以建议大家也直接引用jquery进行操作; 然后将jtopo.js下载到本地,放到自己的vue项目的静态文件目录下,如下图: ![vue引入jtopo.js](https://im_vue拖拽流程图

C语言 实现字符串的复制 char * str_copy_char copy-程序员宅基地

文章浏览阅读3.6k次,点赞3次,收藏7次。编写一个函数,实现字符串的复制,函数首部定义为:char*str_copy(char*d,char*s)函数功能为:将第二个参数s所表示的字符串复制到第一个参数d所表示的字符串中,函数返回值为第一个参数的值。请写出完整的函数,并写出主函数,对该函数进行验证。说明:本题不允许使用string.h中的标准函数,不允许改变函数首部char * str_copy1(char *d, char *s);char * str_copy2..._char copy

webgl 学习心得_webgl心得体会-程序员宅基地

文章浏览阅读1.2k次。我本是搞Android 的,公司需要就搞3D展示了,刚开始找了很多资料,觉得threejs最为适合我,原因是我会点前端的东西,threejs也比较简单,demo也齐全;但是,由于公司没有真正的UI,全凭老板一句话,你们懂得,修修改改,晚上学习,白天实现功能,搞了几个月,实现的功能有,导入3d文件,展示楼层,设备参数展示,报警,位置提醒这些主要的功能,又感觉不满意,想要bim功能,又想要游戏效果,其..._webgl心得体会

【Allegro】关于焊盘与封装制作_anti-pad-程序员宅基地

文章浏览阅读3.2k次,点赞2次,收藏15次。焊盘焊盘类型:规则焊盘(Regular Pad),反焊盘(Anti-Pad),热风焊盘,不规则焊盘。Regular Pad规则焊盘,即与元器件管脚焊接的有规则形状的焊盘。Anti-Pad反焊盘,使引脚和周围的铜区域不连接。Thermal Relief又称为花焊盘,热风焊盘,它的主要作用通过减少焊盘与电源和地层敷铜区的连接面积而防止焊接时焊盘散热太快不好焊。热风焊盘需要现在alleg..._anti-pad

随便推点

终极软工笔记-程序员宅基地

文章浏览阅读1k次,点赞20次,收藏10次。例如:随着人工智能的不断发展,机器学习这门技术也越来越重要,很多人都开启了学习机器学习,本文就介绍了机器学习的基础内容。提示:以下是本篇文章正文内容,下面案例可供参考例如:以上就是今天要讲的内容,本文仅仅简单介绍了pandas的使用,而pandas提供了大量能使我们快速便捷地处理数据的函数和方法。

13 Django视图 - URLconf_root_urlconf是什么-程序员宅基地

文章浏览阅读258次。URLconf在settings.py文件中通过ROOT_URLCONF指定根级url的配置urlpatterns是一个url()实例的列表一个url()对象包括:正则表达式视图函数名称name编写URLconf的注意:若要从url中捕获一个值,需要在它周围设置一对圆括号不需要添加一个前导的反斜杠,如应该写作’test/’,而不应该写作’/test/’每个正则..._root_urlconf是什么

使用微信小程序开发制作一个简单的旅游攻略应用_微信小程序编写旅游小程序-程序员宅基地

文章浏览阅读300次,点赞6次,收藏12次。开发者只需熟悉微信小程序的开发流程和相关API,按照需求设计界面、编写交互逻辑,即可实现一个功能完备的小程序应用。当然,以上示例只是一个简单的示范,实际项目的开发还需要根据具体需求进行调整和完善。二、项目开发 1.创建项目 打开微信开发者工具,点击新建项目,填写项目名称和项目路径,选择对应的小程序类型,点击确定创建项目。以上是一个简单的旅游攻略应用的微信小程序开发示例,通过以上代码可以实现目的地、酒店和美食的展示和存储。可以使用微信小程序提供的组件进行页面的布局和样式的设置,也可以自定义组件来满足需求。_微信小程序编写旅游小程序

随笔---数据库索引总结_模糊查询 半包走索引-程序员宅基地

文章浏览阅读128次。建立索引的目的:加快查询的效率,当查询多于增删操作,适用于建立索引,建立索引的列,一旦进行增删改会进行索引的维护,也不宜大量建索引,索引会占用磁盘空间。建立索引的地方:数据库以查询为主,在经常查询的列上需要join的字段上,join的字段类型也应该相同多个列建立索引,能满足最左前缀原则主键,外键建立索引确保索引的唯一性数据长度较小的列,索引文件小如果一个列是比较长的字符串,为了加快这..._模糊查询 半包走索引

MySQL5.6 PERFORMANCE_SCHEMA 说明_mysql 5.6 关闭performance部分功能-程序员宅基地

文章浏览阅读1k次。背景: MySQL 5.5开始新增一个数据库:PERFORMANCE_SCHEMA,主要用于收集数据库服务器性能参数。并且库里表的存储引擎均为PERFORMANCE_SCHEMA,而用户是不能创建存储引擎为PERFORMANCE_SCHEMA的表。MySQL5.5默认是关闭的,需要手动开启,在配置文件里添加:[mysqld]performance_schema=ON_mysql 5.6 关闭performance部分功能

css首行缩进(css首行缩进)-程序员宅基地

文章浏览阅读7.1k次,点赞4次,收藏22次。首行缩进连个字符和首行缩进连个字是一样的概念?首行缩进连个字符和不一样的概念啊,字符和字是不一样的如何在css中控制段落的首行缩进??如何在css中控制段落的首行style="text-indent:24px"……控制段落缩进,24px是缩进距离……#####例如,拿你说的话举例:css中,我想..._css 首行缩进一个字

推荐文章

热门文章

相关标签